The RTK base station has two parts: the transmitter and the receiver.
- RTK Transmitter (Base Unit) The transmitter is a puck-shaped module. To set it up:
- Mount it onto the included stand and tighten it firmly.
- Plug in the signal cable.
- When the LEDs light up, the unit is powered on. The blue LED on the stand shows the base-station battery level.
- RTK Receiver (Controller Side) Plug the RTK receiver into the controller’s Type-C port.
Power on the controller. Tap Settings in the top-right corner, then open RTK. You’ll see three options: Qianxun, NTRIP, and USB.
- In Mainland China, you can use Qianxun network RTK.
- In some countries/regions, you can use NTRIP network RTK.
- If network RTK is not available, for safe centimeter-level positioning near walls, we strongly recommend using the RTK base station—select USB mode.
After selecting USB, a pop-up will appear: “Allow Agri to access USB Serial Converter?” Tap OK.
Now, under USB mode, next to Network Status, you’ll see a green light flashing. We also recommend turning on Auto Connect.
Go back to the home screen. When you see RTK satellite count updating, the connection is successful.