{"id":15948,"date":"2026-06-24T15:32:03","date_gmt":"2026-06-24T07:32:03","guid":{"rendered":"https:\/\/eauav.com\/?p=15948"},"modified":"2026-09-07T15:48:03","modified_gmt":"2026-09-07T07:48:03","slug":"m400-facade-cleaning-kit-options-a1-a2-b-c","status":"publish","type":"post","link":"https:\/\/eauav.com\/th\/m400-facade-cleaning-kit-options-a1-a2-b-c\/","title":{"rendered":"DJI M400 Facade Cleaning Kit Options: A1, A2, B and C"},"content":{"rendered":"\n

The EAUAV DJI M400 Facade Cleaning Kit is available in four configurations. The correct choice depends on two decisions:<\/p>\n\n\n\n

    \n
  1. Do you want the lower-cost single-nozzle A1 workflow or the smoother dual-nozzle A2 workflow?<\/li>\n\n\n\n
  2. Will you use a locally sourced pump, an EAUAV-supplied standalone pump, or the integrated white ground system?<\/li>\n<\/ol>\n\n\n\n

    For most commercial facade-cleaning teams, Option A2 is the recommended starting point<\/strong>. Options B and C build on A2 by adding different ground equipment.<\/p>\n\n\n\n

    \n

    DJI Matrice 400 aircraft, original DJI controller, TB100 batteries and BS100 charging station are not included in the standard cleaning-kit supply unless specifically listed in the quotation.<\/p>\n<\/blockquote>\n\n\n\n

    Quick Comparison<\/h2>\n\n\n\n
    Option<\/th>Configuration<\/th>Best for<\/th>Workflow position<\/th><\/tr><\/thead>
    A1<\/strong><\/td>Single-Nozzle Kit<\/td>Lowest-entry-cost technical validation and straightforward spray tasks<\/td>Land to change the nozzle between foam and rinse<\/td><\/tr>
    A2 \u2014 Recommended<\/strong><\/td>Dual-Nozzle Kit<\/td>Commercial operators who want a smoother foam-to-rinse workflow<\/td>Select the active spray head from the DJI controller<\/td><\/tr>
    B<\/strong><\/td>A2 + K\u00e4rcher HD 6\/15-4 M Classic<\/td>Customers who need a matched standalone professional pump<\/td>A2 airborne workflow plus a compact EAUAV-supplied pump<\/td><\/tr>
    C<\/strong><\/td>A2 + Gen-2 Integrated Ground System<\/td>Teams that want an integrated pump, tank, reel and detergent workflow<\/td>Premium ground workflow with the white mobile unit<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

    There is no electrical power-tether option in the current product range. For cleaning continuity, EAUAV recommends a three-TB100 battery rotation.<\/p>\n\n\n\n

    \"DJI<\/figure>\n\n\n\n

    Option A1 \u2014 Single-Nozzle Kit<\/h2>\n\n\n\n

    Lower-Cost Technical Validation<\/h3>\n\n\n\n

    Option A1 is the simplest airborne configuration. It is appropriate when the buyer wants to validate the market at a lower initial equipment cost or primarily expects straightforward water-fed work.<\/p>\n\n\n\n

    For foam-to-rinse cleaning, the A1 workflow is:<\/p>\n\n\n\n

      \n
    1. Take off with the foam nozzle installed.<\/li>\n\n\n\n
    2. Apply foam or cleaning solution.<\/li>\n\n\n\n
    3. Land the aircraft.<\/li>\n\n\n\n
    4. Manually replace the nozzle with the pressure-rinse nozzle.<\/li>\n\n\n\n
    5. Take off again and rinse with clean water.<\/li>\n<\/ol>\n\n\n\n

      The required landing and nozzle change add a manual step, but the workflow is easy to understand and keeps the airborne configuration simple.<\/p>\n\n\n\n

      Choose A1 if:<\/h3>\n\n\n\n