Some things that power personnel should pay attention to when entering modular substation work?

Those who want to work in a modular substation must have a work ticket, which means to go through the permit procedures, and then confirm that the safety measures are in place, and can only start work after obtaining the permit. You must follow the requirements. If you don't apply for these certificates, you can't use them. And before the operation, you need to check the electricity. There are some professional knowledge points to understand. Power failure does not mean that there is no electricity. Electricity such as capacitors must be discharged, because its capacitance is similar to a battery, and some circuits are more efficient than electricity. Yes, some power plants related substations also need to prevent reverse power transmission. In addition to these, you need to pay attention to that you must work with more than two people. Therefore, it is necessary to meet these requirements to work in a modular substation.

 If electricians go to work in modular substations, they also need to pay attention to that they must keep a safe distance from live equipment. Can not touch irrelevant equipment. And to ensure that the personnel are in good spirits, so the personnel engaged in working here must have relevant special operation certificates. It cannot be operated during a period of thunderstorms.

In addition, you also need to wear a safety helmet and enter the secondary room. Some large substations require that the mobile phone be turned off. If there are some other electronic products, it must be turned off. When using the 5 anti-key, if it cannot be unlocked, it must not be forcibly unlocked. In short, all regulations and systems must be strictly implemented. If the equipment is defective or has abnormal operating conditions. It must be repaired. I hope you can find time to learn about these related content.