Video Duration: 9 minutes 12 seconds
The TopxGun Agri Assistant App (V7.0 or later) is your command center for the FP700. This lesson familiarizes you with its interface and key functionalities.
Main Interface Overview:
The main interface provides a comprehensive view of the drone’s status and access to various functions.
- Status Bar: Displays critical information like connection status (RC, Drone), GPS/RTK signal strength, battery levels (drone and RC), and current flight mode.
- Map/FPV View: Toggles between a real-time map display for navigation/planning and the FPV from the drone’s camera.
- Telemetry Data: Shows real-time flight data like speed, altitude, distance, flow rate (if spraying), and area covered.
- Function Buttons: Access points for Task Planning, Operation Execution, Device Management, and User Settings.
Key Menu Sections:
- Device Management:
- View connection status and version information for the drone, remote controller, batteries, and payload systems. Manage firmware updates.
- Access calibration routines (Sprayer, Spreader Weight).
- Upload flight logs.
- Task Planning & Execution:
- Mapping: Create field boundaries and mark obstacles using various methods (RC mapping, aircraft mapping, RTK). Import existing survey maps.
- Route Planning: Define flight paths, set parameters like swath width, flight speed, altitude, application rate, turn modes, and obstacle avoidance settings.
- Operation Modes: Select between Manual (M+), AB Point, Fully Autonomous, AB-T, and other available modes.
- Settings:
- Flight Parameters: Adjust maximum speed, altitude limits, return-to-home altitude, etc..
- Safety Settings: Configure low battery actions (Level 1 & 2 warnings) and lost connection behavior (Return-to-Home, Hover, Land).
- Radar Settings: Enable/disable obstacle avoidance and terrain following. Adjust sensitivity and bypass settings if available.
- Spraying/Spreading Parameters: Fine-tune application rates, droplet sizes (spraying), feed roller/disc speed (spreading).
- RC Settings: Calibrate sticks, customize button assignments, select control mode (e.g., American Hand).
- General Settings: Change measurement units (metric/imperial), language, etc.
- User Account: Switch between user accounts, manage profile information.
Familiarizing yourself with the Agri Assistant App interface is crucial for efficient planning and safe operation of your FP700.