Dry Type Cast Resin Power Transformer Electricity Principle

Cast resin power transformer is a relatively important electrical equipment, and it can also use electricity for dry-type transformers. Dry-type cast resin power transformers also have their own current and voltage for electricity use, because the models, characteristics and applications of dry-type transformers are different. In fact, their various power distribution equipment is also different. About dry-type transformers The relevant guidelines for power distribution equipment and installations are summarized as follows:

1. If the factory land is tight and the capacity increase is not very large, you can consider replacing all the original dry-type transformers, high-voltage switchgear, low-voltage switchgear and cables, and choose a dry-type transformer with a larger capacity to reinstall .This can save space to the greatest extent, but the amount of engineering is relatively complex.

2. If the power consumption of the factory is relatively tight, you can consider installing a new outdoor box-type substation. The newly-installed box-type substation can save space, and at the same time, the amount of engineering is small and the construction period is short. It is an economical and practical capacity expansion plan.

3. Dry-type transformer manufacturers usually choose to install a dry-type transformer and supporting high and low voltage switch cabinets in the original power room, or build a new power distribution room. This can greatly ensure the safety and stable power supply of the power distribution room. Supply power reliability.

Dry-type transformers are also required for power distribution. On the basis of the basic rules and relevant placement rules of various power distribution equipment, the safety and stability of dry-type transformers can be improved, so that dry-type transformers can be Safe operation!