Amorphous Core Distribution Transformer Coil

At present, amorphous core distribution transformers are composed of iron cores, windings, and leads. The iron cores and windings of the transformers need to be tightly braced. The existing support method is an insulating plate in-line tightening structure. There is a big problem with this tightening structure. When it is too tight, it is easy to damage the coil, and when it is too loose, it is easy to fall off.

The purpose of the utility model is to provide an amorphous core distribution transformer support device in order to solve the problems existing in the prior art.

The utility model not only supports the iron core and the coil winding well, but also prevents damage to the coil by the holding device and the falling off of the device, and can be installed conveniently.

The utility model adopts the following technical solutions:

The amorphous core distribution transformer supporting device is composed of iron core and coil winding. It is characterized by elastic insulating plate and insulating rod supported between the iron core and the coil winding.

The elastic insulating plate can be in an arc-shaped structure under the extrusion of the insulating rod, and is well matched with the outer coil. The coil will not be damaged during installation, nor will it fall off due to being too loose under the action of elasticity. The elastic board can be epoxy board, and the insulating rod is epoxy rod. The diameter of the epoxy rod can be selected according to the gap between the iron core and the coil winding.

By adopting the elastic connection of the utility model, the coil can be well protected, and at the same time, the iron core and the coil are reliable and do not fall off. By adopting the structure, the epoxy board can be saved, and the manufacturing deviation of the structure of the iron core and the low-voltage coil itself can be easily adjusted. , thereby improving labor efficiency.